Log In
Contacts
Non-contact soldering for high requirements.
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. The heating elements as well as the nozzles comply with the international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
The antistatic design as well as the microcontroller of the AOYUE Int 968 A+ prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy to manage and therefore ensure an easy handling. The built-in smoke absorber extracts the fume directly from where it is generated. The temperature of the soldering ironis shown on the digital display and can be easily adjusted by using a rotary knob ensuring a fast and precise temperature setting.
The soldering station informs the user via display about possible malfunctions on the sensors or on the heating elements.
By blowing, the Auto-cooling functionprovides for the lowest possible temperature on the heating element before being switched off in order to extend the life of the heating element. Of course, this repairing system can also be used for the shrinking of shrink hoses and is indispensable in the field of chiptuning, repairing mobile phones, laptops and video game consoles.
• High heating capacity
• SMD fine soldering iron
• Highest heating-up
• Exact options for adjustment
• Automatic cooling - and follow up phase
• Fan nozzles in compliance with international standard
• Suitable for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), which has to be removed BEFORE using the station for the very first time! After removing the safety transport the station is ready to be operated. You don´t need but 5 minutes only to have a complete hot air station The temperature as well as the air flow can be adjusted via "AIR" and "Heater".
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. The heating elements as well as the nozzles comply with the international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
The antistatic design as well as the microcontroller of the AOYUE Int 968 A+ prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy to manage and therefore ensure an easy handling. The built-in smoke absorber extracts the fume directly from where it is generated. The temperature of the soldering ironis shown on the digital display and can be easily adjusted by using a rotary knob ensuring a fast and precise temperature setting.
The soldering station informs the user via display about possible malfunctions on the sensors or on the heating elements.
By blowing, the Auto-cooling functionprovides for the lowest possible temperature on the heating element before being switched off in order to extend the life of the heating element. Of course, this repairing system can also be used for the shrinking of shrink hoses and is indispensable in the field of chiptuning, repairing mobile phones, laptops and video game consoles.
• High heating capacity
• SMD fine soldering iron
• Highest heating-up
• Exact options for adjustment
• Automatic cooling - and follow up phase
• Fan nozzles in compliance with international standard
• Suitable for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), which has to be removed BEFORE using the station for the very first time! After removing the safety transport the station is ready to be operated. You don´t need but 5 minutes only to have a complete hot air station The temperature as well as the air flow can be adjusted via "AIR" and "Heater".
SKU | 90968A+ |
Registrierungsnummer | WEEE DE45283704 |
Anzahl Packstücke | 1 |
Dimensions | 245 x 185 x 135 mm |
Weight in kg | 5.25 |
Colour | black |
Input voltage | 230 Volt +/-10% / 50 Hz +/-2Hz |
cable length | to the holder ~ 1.2m |
Station Type | Reworkstation |
Hot air compressor | Diaphragma Pumpe |
Equipment Features | Heißluft LötstationLötkolbenLötrauchabsaugung |
Application Area | bleifreies Lötenbleihaltiges Löten |
suitable Heating Elements | Heißluftkolben: 20094 (WilTec Art. 90103)Lötkolben: C009 (WilTec Art. 90192) |
Product details | ESD SAFELötrauchabsaugung 600 mmHg (24in.HG) |
Delivery content | 911249113091196911979121091313Anleitung_DEAnleitung_ENBauteilheberHeißluftgebläse-HalterungKaltgerätekabelLötkolbenLötkolbenablageLötrauchabsaugung |
Nozzle-Dimension | 1x 4-Eckige Düse; 3x Runde Düsen: 3mm / 5mm / 11mm |
Soldering tip system | T-Series |
Soldering Iron Tips | Spitze Meißelform / Chisel Type |
Station Details | Eingangsspannung 230-250V 50HzInt968A+ |
Soldering Iron Details | Betriebsspannung des Lötkolbens 24V / ACKeramik HeizelementLeistungsaufnahme 70WPotential Erde / Lötspitze < 2 mVTemperaturbereich 200-480°CWiderstand Erde / Lötspitze < 2 Ohm |
Hot Air Gun | Diaphragma PumpeHeizelement - MetallkernelementLeistungsaufnahme 550WPumpenleistung 23l/minTemperaturbereich 100-480°C |
net Weight [kg] | 5.0000 |
---|---|
Package: Height in mm | 205 |
Package: Length in mm | 345 |
Package: Width in mm | 335 |
Availability | Immediate dispatch, available within 3-5 business days* |
Shipping | Paket |
-
sehr-sehr gut Review by tirüitz-1
Price Performance Ratio Meets expectations Ease of use Design Overall Score Ein tolles Preis-Leistungsverhältnis (Posted on 8/28/16)
-
Einfach Super! Review by Konsolenumbau.Expert
Price Performance Ratio Meets expectations Ease of use Design Overall Score Unschlagbar im Preis/Leistungsverhältnis!
Im Bereich Konsolenumbau und Smartphone Reparatur wohl das beste was man zu diesem Preis erwerben kann.
Super schnelle Aufheizzeiten, konstante Temperaturen und super Handling. Diverses Zubehör zu fairen Preisen erhältlich.
Ich würde die Station jedem vorbehaltlos empfehlen der keine 1000 Euro ausgeben möchte oder kann. (Posted on 7/22/16) -
Excellent Review by Bil Mc
Price Performance Ratio Meets expectations Ease of use Design Overall Score We bought this station after some research on the internet. Mainly for repairing auto related circuit boards
Everytjing worked perfect for us.
I can recommend this station.
Regards Sverker. (Posted on 2/24/16)
Write Your Own Review
Technical documentation
You may also be interested in the following product(s)
-
AOYUE 933 - Solder Fume Extraction System-Smoke Absorber-washable
• 16W Soldering Smoke Absorber
• Active Carbon Filter€32.40Incl. 19% VAT, plus. Shipping costSKU: 91933 -
AOYUE 486 Smoke Absorber Fume Extraction Unit for Soldering Station
Lötrauchabsaugung
• auswaschbares Filterelement
• inkl. Ersatzfilter€35.81Incl. 19% VAT, plus. Shipping costSKU: 91486 -
AOYUE Int2703A+ Repairing Station Hot Air Soldering Desoldering
• 70W Ceramic Element
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction€384.92Incl. 19% VAT, plus. Shipping costSKU: 902703A+ -
AOYUE Int852 Hot Air Station Digital SMD Rework Station
• Diaphragm pump max. 23l/min
• CPU controlled, temperature- and air flow control over control dial
• Temperature- and air flow displayIncl. 19% VAT, plus. Shipping costSKU: 90852 -
AOYUE Int852A+ Hot Air Station digital SMD Rework Station
• Membranpumpe mit max. 23l/min
• Metallkernheizelement
• CPU geregelt, Temperatur- und Lufstromregelung über Taster
• Temperatur- und LuftstromanzeigeIncl. 19% VAT, plus. Shipping costSKU: 90852A+ -
AOYUE Int852A++ Hot Air Station SMD Rework Station Hot Air with Placer
• Membranpumpe mit max. 23l/min
• Metallkernheizelement
• CPU geregelt
• Temperatur- und Lufstromregelung über Taster
• Temperatur- und Luftstromanzeige
• Vakuum BauteilheberIncl. 19% VAT, plus. Shipping costSKU: 90852A++ -
AOYUE Int853A Quartz IR PreHeating Station Circuits Preheat 500W
• input power 500W
• Quartz IR heating element
• operable temperature range 80-450°C€153.94Incl. 19% VAT, plus. Shipping costSKU: 90853A