AOYUE FEK-01 Solder Smoke Absorber Fume Extractor LED-Lamp Extraction Arms low-noise HEPA-filter
• Highly efficient
• Activated carbon beads
• 2 adjust. extraction arms
• LED lamp
• Filters 97% particles >0.3μm
• HEPA-Filter
• Portable design
During all welding processes solder fluxes inevitably generate toxic fumes or gases. To prevent respiratory illnesses the §53 of the German workplace regulations prescribes the use of a smoke absorber. Moreover, the fact that solder flux condensation on the circuit board can lead to problems makes the use of a fume absorber absolutely necessary.
The device has an electronic control panel with various airflow settings.
The system possesses the following features:
• Powerful suction performance and low-noise operation
• Activated carbon beads that trap odour and toxins
• Filters out 97 % of particles bigger than 0,3 μm
• Sub-filters prolong the service time of pre-filters and main filters
• Freely adjustable exhaust ducts including exhaust duct arm kit
• Special nozzle with an integrated LED lamp and activated carbon subfilter
• HEPA-Filter (High Efficiency Particulate Air filter ) for removing dust particles. For an effective filtartion we recommend exchanging the filter every six months.
• Portable and wheeled for easy transportation
• Ducts can be bent as desired and keep shape after adjustment
Disposal note: When this product is used as intended, a "soldering smoke" suction, we recommend to dispose of it as hazardous waste.
| Eingangsleistung: | 200 Watt |
|---|---|
| Filterart: | HEPA Filter |
| Leistungsaufnahme: | 200 W |
| Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Ersatzteile
No longer available
• HEPA and activated carbon bead filter
• Effectively cleans the air
• Filters 97% of the particles bigger than 0.3 μm
• Fits the AOYUE FEK-01 solder smoke absorber
Empfehlung: Löten Absaugung
No longer available
• HEPA and activated carbon bead filter
• Effectively cleans the air
• Filters 97% of the particles bigger than 0.3 μm
• Fits the AOYUE FEK-01 solder smoke absorber
No longer available
• auswaschbares Filterelement
• inkl. Ersatzfilter
No longer available
• Activated carbon filter for effective filtering
• Light and fan switch
• Low noise
No longer available
• Activated carbon beads
• 2 adjust. extraction arms
• LED lamp
• Filters 97% particles >0.3μm
• HEPA-Filter
• Portable design
Available
• Suitable for 91486 & 90200
Empfehlung: Löten Lötstationen
Available
• Soldering irons with ceramic heater
• Temperature range 300°C - 480°C
• Power consumption 35 W
No longer available
• Equipment for
• AOYUE Int738+
No longer available
• temperature area 100 - 480°C
• metal core heating element
• max. air flow 30 l/min
No longer available
• Temperature- and Airflow adjustable via button
• Soldering Iron with Fume Extraction
No longer available
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction
No longer available
• Temperature control over control dial
• Digital display of actual and set temperature
No longer available
• Temperature adjustable via dial
No longer available
• Temperature via dial, indicated via display
No longer available
• 3in1: Desoldering Gun, Soldering Iron, Fume extraction
• Temperature and Airflow adjustable via dial, indicated via display
No longer available
• CPU controlled, temperature- and air flow control over control dial
• Temperature- and air flow display
No longer available
• Metallkernheizelement
• CPU geregelt, Temperatur- und Lufstromregelung über Taster
• Temperatur- und Luftstromanzeige
No longer available
• Metal core heating element
• CPU controlled
• Temperature and air flow control via buttons
• Temperature and air flow display
• Vacuum component lifter
No longer available
• Quartz IR heating element
• operable temperature range 80-450°C
No longer available
• Quartz IR heating element
• operable temperature range 50-400°C
No longer available
• Quartz Preheater 400 watts
• Soldering and Hot Air Station
No longer available
• Spring easy to clean
No longer available
• kurze Vorheizzeit, gleichmäßige Erwärmung der Platine
• da berührungsfrei, können auch Double-Sided Boards verarbeitet werden.
No longer available
• Temperature control over control dial
• Top Selling Soldering Station
No longer available
• Temperature control over control dial
• Digital display of actual and set temperature
No longer available
• Soldering irons with ceramic heater
• Temperature range 200°C - 480°C
• Power consumption 60 W
• Output voltage 24 V
No longer available
• Display, temperature and air flow adjustment via button
• Temperature of soldering iron via rotary knob
• Solder fume extraction
• Auto cooling function
No longer available
• 3 in 1: Hot Air, Soldering Iron, Fume Extraction and extended accessories
• Temperature and airflow adjustable via button
• Temperature of soldering iron via control dial
No longer available
• Temperature adjustable via rotary knob
• Indication via display
• Integrated soldering fume extraction
No longer available
• Composite ceramic heater
• Temperature range 150°C - 400°C
• Voltage input 12 V
• Weight 0,5 kg
Empfehlung: Löten Draht
Available
• Nozzle bore Ø 0.6 mm
No longer available
• Nozzle bore Ø 0.8 mm
No longer available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€0.74* / 1 metre(s))
No longer available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€1.49* / 1 metre(s))
No longer available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€1.49* / 1 metre(s))
No longer available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.24* / 1 metre(s))
No longer available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€0.74* / 1 metre(s))
No longer available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,25mm - Spool with 0,05 kg
Content: 0.05 kilogram(s) (€149.80* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,25mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€359.90* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€179.90* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€109.90* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€123.96* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€91.96* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€144.90* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€89.90* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€139.96* / 1 kilogram(s))
No longer available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,0mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€95.96* / 1 kilogram(s))
No longer available
• 15 g Lead Free Tin
• Clean and tinning of soldering tips
Content: 0.015 kilogram(s) (€399.33* / 1 kilogram(s))