AOYUE Int866 3in1 Rework Station lead free Hot Air Soldering Station
• 3in1 SMD Lead Free Rework Station
• Quartz Preheater 400 watts
• Soldering and Hot Air Station
The antistatic design prevents the damage of the boards and the electronic components such as by static electricity. Of course, this station also disposes of a cooldown function so that cold air continuously cools the heating element after use. This increases the service life of the heater. The temperature control allows the soldering or unsoldering with the utmost care and security.
The station disposes of a practical holder for the hot air handle and the soldering iron, thus enabling a very light and easy to work. The amount of air and the temperature can be adjusted within a wide range. The jets of the station can be easily replaced, so that each component can be soldered with an optimum nozzle, air and temperature setting. Heating elements and nozzles conform to international standards and are suitable for most SMD components, such as LEDs, SOIC, CHIP, QFP, PLCC, BGA suitable.
The preheater, Aoyue Int 866, uses a fast heat up Quartz IR (infrared) heating element that is easily adjustable and infinitely variable. The gentle, uniform heating prevents the distortion, overheating and damage of the circuit boards. By a variety of display options, a large digital display allows the perfect control of the selected settings, temperatures and programs.
With a total heating performance of up to 400 watts and a steplessly adjustable temperature range from 100 ° C to 480 ° C, this system offers everything you need for extensive work and repairs on a variety of plates, boards and circuit boards. Accurate temperature measurements can be made using an external temperature sensor anytime and anywhere on the component.
With the integrated PCB holder almost all kinds of Printed circuit boards can be securely fixed and processed. This flexible system also allows an easy gripping of round or triangular boards without much effort.
You get the base station Aoyue 866 for lead-free soldering including the following accessories:
- Soldering Iron (B012) with 60 watts and 10 Soldering Tips
- Hot air unit with handle (4 nozzles)
- Soldering Iron Holder with dry sponge and tin scraper
- Aoyue 939 Vacuum Pickup Set (WilTec-type 91939).
- Lifting device (IC Popper)
- Aoyue Toolkit - Case
Subject to technical changes!
Due to further developments illustrations, functioning steps and technical data may differ slightly.
| Dimensions: | 192 x 325 x 100 mm |
|---|---|
| Eingangsspannung: | 230 Volt +/-10% / 50 Hz +/-2Hz |
| Stationstyp: | Heißluftstation |
| Temperaturbereich °C: | 100 °C bis 480 °C |
Empfehlung: Löten Lötstationen
Available
• Soldering irons with ceramic heater
• Temperature range 300°C - 480°C
• Power consumption 35 W
Available in 2 days
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction
Available
• Temperature control over control dial
• Digital display of actual and set temperature
Available
• Temperature via dial, indicated via display
Available in 2 days
• CPU controlled, temperature- and air flow control over control dial
• Temperature- and air flow display
Available
• Metallkernheizelement
• CPU geregelt, Temperatur- und Lufstromregelung über Taster
• Temperatur- und Luftstromanzeige
Available
• Metal core heating element
• CPU controlled
• Temperature and air flow control via buttons
• Temperature and air flow display
• Vacuum component lifter
Available in 2 days
• Quartz IR heating element
• operable temperature range 80-450°C
Available in 2 days
• Quartz Preheater 400 watts
• Soldering and Hot Air Station
Available
• Soldering irons with ceramic heater
• Temperature range 200°C - 480°C
• Power consumption 60 W
• Output voltage 24 V
Available in 2 days
• 3 in 1: Hot Air, Soldering Iron, Fume Extraction and extended accessories
• Temperature and airflow adjustable via button
• Temperature of soldering iron via control dial
Available in 2 days
• Temperature adjustable via rotary knob
• Indication via display
• Integrated soldering fume extraction
Available
• temperature: max. 480 ° C
• fast heating & stable temperature
• error detection and alarm
• for sensitive components
Empfehlung: Löten Absaugung
Available in 2 days
• HEPA and activated carbon bead filter
• Effectively cleans the air
• Filters 97% of the particles bigger than 0.3 μm
• Fits the AOYUE FEK-01 solder smoke absorber
Available in 2 days
• auswaschbares Filterelement
• inkl. Ersatzfilter
Available in 2 days
• Activated carbon filter for effective filtering
• Light and fan switch
• Low noise
Available in 2 days
• Activated carbon beads
• 2 adjust. extraction arms
• LED lamp
• Filters 97% particles >0.3μm
• HEPA-Filter
• Portable design
Available in 2 days
• Suitable for 91486 & 90200
Empfehlung: Löten Draht
Available
• Nozzle bore Ø 0.6 mm
Available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.12* / 1 metre(s))
Available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.12* / 1 metre(s))
Available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.87* / 1 metre(s))
Available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.12* / 1 metre(s))
Available
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Content: 1.6 metre(s) (€2.12* / 1 metre(s))
Available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€169.90* / 1 kilogram(s))
Available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€117.96* / 1 kilogram(s))
Available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€134.90* / 1 kilogram(s))
Available
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€131.96* / 1 kilogram(s))
Available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€104.90* / 1 kilogram(s))
Available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€85.96* / 1 kilogram(s))
Available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,mm - Spool with 0,1 kg
Content: 0.1 kilogram(s) (€84.90* / 1 kilogram(s))
Available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,0mm - Spool with 0,25 kg
Content: 0.25 kilogram(s) (€91.96* / 1 kilogram(s))
Available
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,25mm - Spool with 0,05 kg
Content: 0.05 kilogram(s) (€279.80* / 1 kilogram(s))
Available
• 15 g Lead Free Tin
• Clean and tinning of soldering tips
Content: 0.015 kilogram(s) (€399.33* / 1 kilogram(s))