• 70W Ceramic Element
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. Heating elements and nozzles conform to international standard; suitable for the most SMD components, for instanceLEDs, SOIC, CHIP, QFP, PLCC and BGA.
The Aoyue Int 2703 A+ is a CPU controlled Rework station. It unites all advantaged and functions of a hot air soldering station, solder station, fume extraction unit and desoldering gun in one unit.
The 2703A+ has a Dual Port System that allows the user to employ simultaneously the lead-free soldering iron as well as the desoldering gun. (the smoke absorber cannot be uses simultaneously with the desoldering gun).
Additionally the rework station can use the new generation of BGA hot air nozzles that allow a more effective reflow process on account of better air and heat dispersion. With these Multi-Chamber BGA nozzles the rework of large BGAs (CPU, GPUs) can be carried out more efficiently.
Another function of the station is the Aoyue Auto Cooling Function, it blows cold air on the heating element when the hot air is switched off until reaching a low temperature in order to extend the life of the heating element.
Temperature and airflow can be adjusted independent of each other via the touch buttons (4 for each) in a temperature range that varies from 100°C - 480°C (hot air) respectively 200°C - 480°C (soldering iron).
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), this must be removed BEFORE using the station for the first time!
The built-in smoke absorber delivers a constant smoke extraction of 600mmHg. Fume extraction is mandatory according to worplace regulation § 53 in Germany in order to avoid respiratory diseases.
Abmessungen: | 250 x 188 x 126 mm |
---|---|
Kabellänge (m): | 1.2 Meter |
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Stationstyp: | Reworkstation |
Ersatzteile
Produkten finns inte längre tillgänglig
• Aoyue Type 10094/20094
Produkten finns inte längre tillgänglig
• Diameter: 2.4mm
Produkten finns inte längre tillgänglig
Produkten finns inte längre tillgänglig
Produkten finns inte längre tillgänglig
Produkten finns inte längre tillgänglig
Produkten finns inte längre tillgänglig
Empfehlung: Löten Lötstationen
Omedelbart tillgänglig
• Soldering irons with ceramic heater
• Temperature range 300°C - 480°C
• Power consumption 35 W
Produkten finns inte längre tillgänglig
• Equipment for
• AOYUE Int738+
Produkten finns inte längre tillgänglig
• temperature area 100 - 480°C
• metal core heating element
• max. air flow 30 l/min
Produkten finns inte längre tillgänglig
• Temperature- and Airflow adjustable via button
• Soldering Iron with Fume Extraction
Produkten finns inte längre tillgänglig
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Digital display of actual and set temperature
Produkten finns inte längre tillgänglig
• Temperature adjustable via dial
Produkten finns inte längre tillgänglig
• Temperature via dial, indicated via display
Produkten finns inte längre tillgänglig
• 3in1: Desoldering Gun, Soldering Iron, Fume extraction
• Temperature and Airflow adjustable via dial, indicated via display
Produkten finns inte längre tillgänglig
• Temperature control via sensor panel
• Indication via Display
• Soldering Iron & Tweezer included
Produkten finns inte längre tillgänglig
• Temperature- and Airflow adjustable via button
• 15V DC Power Supply included
Produkten finns inte längre tillgänglig
• CPU controlled, temperature- and air flow control over control dial
• Temperature- and air flow display
Produkten finns inte längre tillgänglig
• Metallkernheizelement
• CPU geregelt, Temperatur- und Lufstromregelung über Taster
• Temperatur- und Luftstromanzeige
Produkten finns inte längre tillgänglig
• Metal core heating element
• CPU controlled
• Temperature and air flow control via buttons
• Temperature and air flow display
• Vacuum component lifter
Produkten finns inte längre tillgänglig
• Leistungsaufnahme 500W
• Temperaturbereich 100-300°C
Produkten finns inte längre tillgänglig
• Quartz IR heating element
• operable temperature range 80-450°C
Produkten finns inte längre tillgänglig
• Temperature range 80°C - 380°C
• Three predefined programs
• Time and temperature settings possible
Produkten finns inte längre tillgänglig
• Temperature range 80°C - 380°C
• Three predefined programs
• Time and temperature settings possible
• Ttemperature probes
Produkten finns inte längre tillgänglig
• Quartz IR heating element
• operable temperature range 50-400°C
Produkten finns inte längre tillgänglig
• Quartz Preheater 400 watts
• Soldering and Hot Air Station
Produkten finns inte längre tillgänglig
• Spring easy to clean
Produkten finns inte längre tillgänglig
• kurze Vorheizzeit, gleichmäßige Erwärmung der Platine
• da berührungsfrei, können auch Double-Sided Boards verarbeitet werden.
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Top Selling Soldering Station
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Digital display of actual and set temperature
Empfehlung: Löten Absaugung
Produkten finns inte längre tillgänglig
• HEPA and activated carbon bead filter
• Effectively cleans the air
• Filters 97% of the particles bigger than 0.3 μm
• Fits the AOYUE FEK-01 solder smoke absorber
Produkten finns inte längre tillgänglig
• auswaschbares Filterelement
• inkl. Ersatzfilter
Produkten finns inte längre tillgänglig
• Activated carbon filter for effective filtering
• Light and fan switch
• Low noise
Produkten finns inte längre tillgänglig
• Activated carbon beads
• 2 adjust. extraction arms
• LED lamp
• Filters 97% particles >0.3μm
• HEPA-Filter
• Portable design
Omedelbart tillgänglig
• Suitable for 91486 & 90200
Empfehlung: Löten Draht
Omedelbart tillgänglig
• Nozzle bore Ø 0.6 mm
Produkten finns inte längre tillgänglig
• Nozzle bore Ø 0.8 mm
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (0,74 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (1,49 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (1,49 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (2,24 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (0,74 €* / 1 meter)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,25mm - Spool with 0,05 kg
Innehåll: 0.05 kilogram (149,80 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,25mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (359,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (179,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (109,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (123,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (91,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (144,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (89,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (139,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,0mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (95,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• 15 g Lead Free Tin
• Clean and tinning of soldering tips
Innehåll: 0.015 kilogram (399,33 €* / 1 kilogram)