• 70 W Ceramic Element
• 3 in 1: Hot Air, Soldering Iron, Fume Extraction and extended accessories
• Temperature and airflow adjustable via button
• Temperature of soldering iron via control dial
The air volume and the temperature can be set or adjusted in a wide range, the nozzles can be easily replaced so that each component is soldered by using the suitable nozzle, air and temperature setting. Heating elements and nozzles conform to international standard; suitable for the most SMD components, for instance LEDs, SOIC, CHIP, QFP, PLCC and BGA.
This version of the 968a+ is convincing due to its practical accessories. Eight additional soldering tips, a spare heating element, filter pads for the smoke absorber and a tweezer handle for highly specialized work.
The antistatic design as well as the microprocessor control of the AOYUE Int 968 A+ multi-function repairing system prevents PCBs and electronic components from being damaged due to static charging. The control panel as well as the whole rework station are easy manageable. The built-in smoke absorber extracts the fume directly at the source where it is generated. The tempertaure of the soldering iron is showed on the digital display and can be adjusted by using the rotary knob allowing a fast and precise temperature setting.
The station informs the user via display about possible malfunctions on the sensors or the heating elements. Another function of the station is the Aoyue Auto Cooling Function, it blows cold air on the heating element when the hot air is switched off until reaching a low temperature in order to extend the life of the heating element. The repairing system can also be used for heat shrink-tubing and is indispensable in the filed of chiptuning, repairing mobile phones, laptops and video game consoles
• High heating capacity
• Exact adjustment possibilities
• Automatic cooling and follow up phase
• SMD fine soldering iron
• Fan nozzles in accordance with international standard
• Very fast heating
• Suitable for SOIC, CHIP, QFP, PLCC, PSOP, SSOP, BGA etc.
The station is delivered with a transport safety (a red cross screw that secures the pump during transport), this must be removed before using the station for the first time! After removing the safety transport the station is fully operational. You only need approx. 5 minutes to have your station ready. The temperature and the air flow can be adjusted via "AIR" and "Heater".
Abmessungen: | 245 x 185 x 135 mm |
---|---|
Netzspannung/Frequenz (V~Hz): | 220–240 V / 50 Hz |
Stationstyp: | Reworkstation |
Empfehlung: Löten Lötstationen
Omedelbart tillgänglig
• Soldering irons with ceramic heater
• Temperature range 300°C - 480°C
• Power consumption 35 W
Produkten finns inte längre tillgänglig
• Equipment for
• AOYUE Int738+
Produkten finns inte längre tillgänglig
• temperature area 100 - 480°C
• metal core heating element
• max. air flow 30 l/min
Produkten finns inte längre tillgänglig
• Temperature- and Airflow adjustable via button
• Soldering Iron with Fume Extraction
Produkten finns inte längre tillgänglig
• Temperature and Airflow adjustable via button
• 4in1: Desoldering, Soldering, Hot Air & Fume Extraction
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Digital display of actual and set temperature
Produkten finns inte längre tillgänglig
• Temperature adjustable via dial
Produkten finns inte längre tillgänglig
• Temperature via dial, indicated via display
Produkten finns inte längre tillgänglig
• 3in1: Desoldering Gun, Soldering Iron, Fume extraction
• Temperature and Airflow adjustable via dial, indicated via display
Produkten finns inte längre tillgänglig
• CPU controlled, temperature- and air flow control over control dial
• Temperature- and air flow display
Produkten finns inte längre tillgänglig
• Metallkernheizelement
• CPU geregelt, Temperatur- und Lufstromregelung über Taster
• Temperatur- und Luftstromanzeige
Produkten finns inte längre tillgänglig
• Metal core heating element
• CPU controlled
• Temperature and air flow control via buttons
• Temperature and air flow display
• Vacuum component lifter
Produkten finns inte längre tillgänglig
• Quartz IR heating element
• operable temperature range 80-450°C
Produkten finns inte längre tillgänglig
• Quartz IR heating element
• operable temperature range 50-400°C
Produkten finns inte längre tillgänglig
• Quartz Preheater 400 watts
• Soldering and Hot Air Station
Produkten finns inte längre tillgänglig
• Spring easy to clean
Produkten finns inte längre tillgänglig
• kurze Vorheizzeit, gleichmäßige Erwärmung der Platine
• da berührungsfrei, können auch Double-Sided Boards verarbeitet werden.
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Top Selling Soldering Station
Produkten finns inte längre tillgänglig
• Temperature control over control dial
• Digital display of actual and set temperature
Produkten finns inte längre tillgänglig
• Soldering irons with ceramic heater
• Temperature range 200°C - 480°C
• Power consumption 60 W
• Output voltage 24 V
Produkten finns inte längre tillgänglig
• Display, temperature and air flow adjustment via button
• Temperature of soldering iron via rotary knob
• Solder fume extraction
• Auto cooling function
Produkten finns inte längre tillgänglig
• 3 in 1: Hot Air, Soldering Iron, Fume Extraction and extended accessories
• Temperature and airflow adjustable via button
• Temperature of soldering iron via control dial
Produkten finns inte längre tillgänglig
• Temperature adjustable via rotary knob
• Indication via display
• Integrated soldering fume extraction
Omedelbart tillgänglig
• Composite ceramic heater
• Temperature range 150°C - 400°C
• Voltage input 12 V
• Weight 0,5 kg
Empfehlung: Löten Absaugung
Produkten finns inte längre tillgänglig
• HEPA and activated carbon bead filter
• Effectively cleans the air
• Filters 97% of the particles bigger than 0.3 μm
• Fits the AOYUE FEK-01 solder smoke absorber
Produkten finns inte längre tillgänglig
• auswaschbares Filterelement
• inkl. Ersatzfilter
Produkten finns inte längre tillgänglig
• Activated carbon filter for effective filtering
• Light and fan switch
• Low noise
Produkten finns inte längre tillgänglig
• Activated carbon beads
• 2 adjust. extraction arms
• LED lamp
• Filters 97% particles >0.3μm
• HEPA-Filter
• Portable design
Omedelbart tillgänglig
• Suitable for 91486 & 90200
Empfehlung: Löten Draht
Omedelbart tillgänglig
• Nozzle bore Ø 0.6 mm
Produkten finns inte längre tillgänglig
• Nozzle bore Ø 0.8 mm
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (0,74 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (1,49 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (1,49 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (2,24 €* / 1 meter)
Produkten finns inte längre tillgänglig
• Length: ca. 1,6 m (Spool)
• Temperature Range: 350 – 450°C
Innehåll: 1.6 meter (0,74 €* / 1 meter)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,25mm - Spool with 0,05 kg
Innehåll: 0.05 kilogram (149,80 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,25mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (359,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (179,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (109,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 0,5mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (123,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 0,5mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (91,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (144,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,mm - Spool with 0,1 kg
Innehåll: 0.1 kilogram (89,90 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: S-Sn96Ag3Cu1
• DIN EN 61190: Sn96Ag03Cu0,4
• 3,5% Flux Material
• Melting Range: 217 - 219 °C
• Ø 1,0mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (139,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• DIN EN ISO 9453: Sn99Cu1(NiGe)
• DIN EN 61190: Fuji Patent
• 3,5% Flux Material
• Melting Range: 227°C eutectic
• Ø 1,0mm - Spool with 0,25 kg
Innehåll: 0.25 kilogram (95,96 €* / 1 kilogram)
Produkten finns inte längre tillgänglig
• 15 g Lead Free Tin
• Clean and tinning of soldering tips
Innehåll: 0.015 kilogram (399,33 €* / 1 kilogram)