Item no.: 90852A++
Shipping weight: 4.01 kg
• Diaphragm pump with a maximum of 23 l/min
• Metal core heating element
• CPU controlled
• Temperature and air flow control via buttons
• Temperature and air flow display
• Vacuum component lifter
Product information "AOYUE Int852A++ Hot Air Station SMD Rework Station Hot Air with Placer"
• CPU monitored!
• the digital display shows the accurate set temperature as well as the current temperature
• air flow rate is accurately indicated by the AIR FLOW METER
• perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
• integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
• unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
• Air flow meter precisely indicates the air flow all time long
• wide temperature and air flow adjustment range.
• the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element
The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle andand at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles, a vacuum pen Aoyue 939 (with spare tips), so that you can work WITHOUT additional costs.
The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time! ! The station is completely operational after the screw removal.You need only 5 minutes to do that and then you have a completely functional hot air station.
The Station has on the side a practical holder for the hot air grip that makes your work easier.
• the digital display shows the accurate set temperature as well as the current temperature
• air flow rate is accurately indicated by the AIR FLOW METER
• perfectly suitable for repairing QFP, SOP, PLCC and SOJ components
• integrated temperature sensor ensures a constant temperature regardless of which air flow rate was set
• unique 15 minute stand-by automatic Sleep Modus. As a result energy is saved, if the station is needed again just touch the handle and the preconfigurated values will be activated again!
• Air flow meter precisely indicates the air flow all time long
• wide temperature and air flow adjustment range.
• the cold air cools off the heating element after use continuously, increasing the lifetime of the heating element
The ideal hot air soldering station. The ideal equipment for use in the laboratory and every workshop. It is a high-tech hot air SMD Rework Station from AOYUE. The model 852++ is easy to handle so that you have no problems when using the station! The temperature is indicated by a digital display. The station changes to power sleep mode when the hot air gun is docked on the handle andand at the same time cools down the heating element. This leads to low energy costs and a long operating life of the heating element. The temperature and the air can be adjusted by means of a selector dial.The air flow is accurately indicated by means of an air tube with a metal ball.The black coated housing is equipped with a practical carrying handle. Even a layman can use the station in a few minutes! You will also receive four different nozzles, a vacuum pen Aoyue 939 (with spare tips), so that you can work WITHOUT additional costs.
The station is delivered with a transportation safety device (a red screw, which secures the pump during transportation), this has to be removed BEFORE using the station for the first time! ! The station is completely operational after the screw removal.You need only 5 minutes to do that and then you have a completely functional hot air station.
The Station has on the side a practical holder for the hot air grip that makes your work easier.
Properties "AOYUE Int852A++ Hot Air Station SMD Rework Station Hot Air with Placer"
Cable length (m): | 0.9 Meter |
---|---|
Dimensions: | 240 x 187 x 137 mm |
Mains voltage/frequency (V~/Hz): | 220–240 V / 50 Hz |
Stationstyp: | Heißluftstation |